Burner Control

Resideo R8184G4066/U

Burner Control Oil Relay Primary with 15 Second Lockout for 4x4 Inch Junction Box or Direct Mount on Burner Housing

$267.84  / ea
Qty
Guests: In Stock. Ships in 1 Business Day.

Product Overview

The TRADELINE intermittent ignition oil primary control operates the oil burner, oil valve (if desired) and the ignition transformer in response to a call for heat from the thermostat. Through a C554 Cad Cell Flame Sensor, the R8184 monitors the burner flame and shuts down the system on ignition failure or on flame failure during the run cycle. A light emitting diode (LED) on the terminal strip lights when the safety switch opens to provide safety shutdown indication. A manual reset button is provided to reset the safety switch after lockout. For convenience in system maintenance, the safety switch can be manually opened using a lever on the front of the control. Clock thermostats that power the clock through the primary control transformer will lose time during lockout unless backup batteries are installed.

  • Provides automatic, no recycling control of an intermittent ignition oil burner system
  • Controls oil burner, oil valves (if desired) and the ignition transformer in response to a call for heat
  • Solid state flame sensing circuit
  • LED on terminal strip indicates system lockout
  • Remote lockout indication (available on some models)
  • Enclosed safety switch with external reset button
  • Manual trip lever opens safety switch for system maintenance
  • Mounts on standard 4 x 4 in junction box select models may be mounted directly on burner housing
  • C554A cadmium sulfide flame detector and 24 VAC thermostat required
  • 22.2 to 44.4 A at 120 to 240 VAC for locked rotor

Product Details

BrandResideo
Product TypeOil Relay Primary with 15 Second Lockout
Used on4x4IN Junction Box or Direct Mount on Burner Housing
Length2-1/2IN
Width4-1/8IN
Height4-3/8IN

Commonly Purchased with This Item     
denotes installation item.

Feedback